How to set the time on the computer?

A computer can now be found in every home. It is not only a device for accessing the Internet, but also a complex system of various functions and capabilities. Most settings are set and updated offline. But there are crashes, for example, when setting the date and time in a specific region. Hence the question arises, how to set the time on the computer? In order to deal with this, it is necessary to familiarize yourself with at least the basic principles of using a personal computer.

to contents ↑

Why do calendar and time settings get off?

There are several reasons why these metrics on your device may go awry. These problems are not global and are easy to fix. Consider several common causes.

BIOS tablet malfunctioning

To fix this problem, replace the battery on the motherboard:

1. First, disconnect the device from power.
2. Then we open the lid of the system unit, we find the BIOS tablet. It is not difficult to replace it, since it is in a single copy the size of a coin.
3. Gently release the lock, remove it from the motherboard.
4. Buy the same in a computer store, install in the usual place.

After that, you will be able to correctly set the time on the computer.

Incorrect time zone

Click on the item to change the time settings, change the time zone in accordance with your region. You can adjust the settings using the “time on the Internet” section. With this option, the device will compare the indicators to the millisecond.

Computer virus

Such a reason for changing calendar parameters is very rare. To fix the problem, install an antivirus, make a device diagnosis. If the situation is more than serious, reinstall the operating system immediately or contact a qualified technician.

From all of the above, we can conclude that most of the problems can be fixed independently, without the intervention of masters.

to contents ↑

Set the clock and date via BIOS

If the clock on your computer is lost due to a dead battery, a message will immediately appear after turning on the device. In the notification, the user is asked to go into the BIOS settings and set the time on the computer or press the F1 key to continue loading the device.

If you are familiar with the basics of using a personal computer, you can safely set the date with the clock without loading the operating system. At the moment, modern systems are available with various types of BIOS. They are divided into two types - old and new (UEFI).

Let's consider them in more detail:

1. Old BIOS - as soon as it boots up, a section will appear on the monitor, which may be called “Main” or “SysInfo”. In any case, this section is always in first place at the top of the screen. Next you will see the date and time indicators. And below or on the right side of the screen, the device gives hints which keys you need to press to change indicators. First you need to press TAB or Enter. And then adjust the date with the clock using the F5 or F6 buttons. To save all the established changes, you should exit BIOS, press the F10 key.
2. New BIOS (UEFI) - go to the advanced settings by pressing the F7 button.Next, click on the “Basic” tab, adjust the date with the clock using the prompts on the right side of the screen. After changing the necessary indicators, exit the settings, saving the changes.

Thus, no special knowledge and effort is required to set the time on the computer. It is enough to familiarize yourself with the basics of using a PC.

to contents ↑

Setting the time on a computer with Windows 7

If you do not know how to change the settings in BIOS, it is better to use the method of changing indicators through the operating system. You can adjust time indicators in Windows 7 using the “timedate.cpl” document, which is located in the “System 32” folder.

You can open a document in several ways:

• Using Windows Search. To do this, we type in the name of the document in the search bar, and it can be found in a matter of seconds. The method is very simple, but every time typing the file name is boring.
• In the lower right corner, hover over the clock image. Then right-click and select the “Change date and time settings” option. If you accidentally pressed the right mouse button, a window with options will appear. Of all you need to select “Time Setting”.
• You can configure the clock on the computer using the control panel. To do this, select the section “Language, region and clock”. Then another tab with points will open. You can select any section you need for editing.
• Using the “Win ​​Master” program. After opening the program in the second tab, you will see information about the calendar and time. By clicking on the section, you will automatically go to the section for editing parameters and you will be able to adjust the time zone and time indicators.

Using these simple methods, you can easily manage the adjustment of calendar and time indicators.

to contents ↑

Setting the calendar and time in Windows 10

Calendar and time indicators in the Windows 10 operating system are configured exactly the same as in the seven. The differences are only in the appearance of the tabs. You can left-click or right-click on the dial by calling the “clock settings” options. In the calendar and clock settings, one large window will open, which is called “Language and Time”. In it, the user has access to all the basic settings of the clock and calendar.

Consider these points in more detail:

1. To edit the clock indicators, go to the “time and date” section.
2. Turn off the automatic time setting.
3. Click on “Change” and edit the clock with the date.
4. Change the time zone to the appropriate one.
5. You can change the design of the calendar and clock using the “change format” option.
6. You can set extra time for different time zones.

to contents ↑

Stock footage

As you can see, coping with the task of setting the calendar and clock on such a device is quite simple. Any confident user can do this.